To synchronize my system to a house sync

1. Connect the external sync source to the House Sync BNC connector on the NVIDIA Quadro Sync or Quadro Sync II card.

   The House Sync LED on the graphics card bracket should turn green to indicate that the hardware has detected the house sync timing signal.

2. From the NVIDIA Control Panel Select a Task pane, under Workstation, click Synchronize Displays.

3. Under The timing server, click the On this system radio button.

4. Click Apply.

Normally, the software automatically detects the signal type that is being used. If the driver fails to detect the signal type, you can force the software to detect the signal type as explained in House Sync Signal Detection.

Related topics

• Synchronize multiple systems

• Adjust how my graphic card handles an external sync signal

• Change the timing signal frequency generated by the server

• Introduce a timing delay to the house sync

• Introduce a timing delay at each client

• Quickly reassign the server

• View the status of my frame lock setup

• House Sync Signal Detection