Hello. Manuel. As I mentioned in my previous 511.09 SD feedback, even with this 511.65, HDMI 2.0 connection with TV(TOSHIBA REGZA 55X920) + SLI configuration (2080Ti), the screen goes black from the moment the driver enters and nothing can be done. Again, I'm in a state of removing the driver from safe mode and reverting to 472.84. SLI bridge removed / single card is no problem.
https://www.nvidia.com/en-us/geforce/forums/studio-drivers/39/480662/nvidia-studio-driver-51109-feedback-thread-release/
The branch hasn't changed so it doesn't look like I'll see any immediate improvement, but the next 520 generation? I hope it can be fixed in the next generation or so. It seems to be a problem with the Windows side, but since there is no problem up to 47x, I think there is a certain problem with the driver side.
It seems that you escalated the issue to the Tier 2 team politely, but I haven't heard from them since. I don't really want to prompt them, it's Studio Driver (and Game Ready Driver). If it doesn't work properly, it's not worth talking about. I would appreciate it if you could fix it for sure :)
1
tukimihime
0
Studio Drivers
tukimihime
Studio Drivers
Nice to meet you, Manuel. Thanks for your reply.
We have submitted the following information as #220106-000369. Please check it. Just to be sure, I'll note the contents here as well.
--------
Hello. Thank you for your reply. I have implemented what you have presented.
The driver installation from the deactivated SLI configuration was indeed successful, but then when I try to re-enable SLI, it hangs at that point.
The computer automatically rebooted, and after that, I couldn't even get to the desktop display at all. I had no choice but to start Safe Mode with the F8 key and remove the driver to recover.
In other words. Rather than the installer being the problem, I got the impression that the driver itself did not work well with the SLI configuration.
There is some uncertainty about BSOD, but in addition to the contents of [VIDEO_SCHEDULER_INTERNAL_ERROR] that I noted last time, now the contents of [DPC_Watchdog_Violation] also appeared. I set up a complete memory dump to see if I could get a DMP file, but unfortunately it only generated a log file(DumpStack.log).
Now I'm using it back to 472.84.
I hope that this will be fixed in the next 51x driver :)
1
tukimihime
4
Studio Drivers
tukimihime
Studio Drivers
Hello. I tried to try a new driver 511.09, but the setup seems to stop in the middle. Sometimes it completes after a few times, but then the screen freezes and stops working. There is no problem with 472.xx, so it seems to be the installer or some other problem. I'm using an SLI environment (RTX 2080 Ti), so that may be a factor. I'll report it as a bug that happened in my environment.
Windows BSOD Error Message : VIDEO_SCHEDULER_INTERNAL_ERROR
Xeon W-3175X + SR-3 DARK + EVGA RTX 2080 Ti FTW3 Ultra Hybrid SLI
Windows 11 Pro (22000.376)
TOSHIBA REGZA X920 (HDMI 2.0)
Hello. Manuel. As I mentioned in my previous 511.09 SD feedback, even with this 511.65, HDMI 2.0 connection with TV(TOSHIBA REGZA 55X920) + SLI configuration (2080Ti), the screen goes black from the moment the driver enters and nothing can be done. Again, I'm in a state of removing the driver from safe mode and reverting to 472.84. SLI bridge removed / single card is no problem. https://www.nvidia.com/en-us/geforce/forums/studio-drivers/39/480662/nvidia-studio-driver-51109-feedback-thread-release/ The branch hasn't changed so it doesn't look like I'll see any immediate improvement, but the next 520 generation? I hope it can be fixed in the next generation or so. It seems to be a problem with the Windows side, but since there is no problem up to 47x, I think there is a certain problem with the driver side. It seems that you escalated the issue to the Tier 2 team politely, but I haven't heard from them since. I don't really want to prompt them, it's Studio Driver (and Game Ready Driver). If it doesn't work properly, it's not worth talking about. I would appreciate it if you could fix it for sure :)
Nice to meet you, Manuel. Thanks for your reply. We have submitted the following information as #220106-000369. Please check it. Just to be sure, I'll note the contents here as well. -------- Hello. Thank you for your reply. I have implemented what you have presented. The driver installation from the deactivated SLI configuration was indeed successful, but then when I try to re-enable SLI, it hangs at that point. The computer automatically rebooted, and after that, I couldn't even get to the desktop display at all. I had no choice but to start Safe Mode with the F8 key and remove the driver to recover. In other words. Rather than the installer being the problem, I got the impression that the driver itself did not work well with the SLI configuration. There is some uncertainty about BSOD, but in addition to the contents of [VIDEO_SCHEDULER_INTERNAL_ERROR] that I noted last time, now the contents of [DPC_Watchdog_Violation] also appeared. I set up a complete memory dump to see if I could get a DMP file, but unfortunately it only generated a log file(DumpStack.log). Now I'm using it back to 472.84. I hope that this will be fixed in the next 51x driver :)
Hello. I tried to try a new driver 511.09, but the setup seems to stop in the middle. Sometimes it completes after a few times, but then the screen freezes and stops working. There is no problem with 472.xx, so it seems to be the installer or some other problem. I'm using an SLI environment (RTX 2080 Ti), so that may be a factor. I'll report it as a bug that happened in my environment. Windows BSOD Error Message : VIDEO_SCHEDULER_INTERNAL_ERROR Xeon W-3175X + SR-3 DARK + EVGA RTX 2080 Ti FTW3 Ultra Hybrid SLI Windows 11 Pro (22000.376) TOSHIBA REGZA X920 (HDMI 2.0)